Brother PJ-763 - Applying Setting Changes to Multiple Printers

Changing the Printer Settings
62
3
Applying Setting Changes to Multiple Printers 3
a After applying settings to the first printer, disconnect the printer from the computer, and then connect the
second printer to the computer.
b Select the newly connected printer from the [Printer] drop-down list.
Note
If the [Automatically detects the connected printer, and retrieves the current settings.] check box in
the [Option Settings] dialog box is selected, the printer connected with the USB cable is automatically
selected.
For more information, see Communication Settings (PJ-762/PJ-763/PJ-763MFi/PJ-773 Only) on page 48.
c Click the [Apply] button.
The same settings that were applied to the first printer are applied to the second printer.
Note
If the [Automatically restart the printer after applying new settings] check box is cleared, the printers
will not be restarted after the settings are changed, reducing the time required to configure the printers.
However, we recommend selecting the [Automatically restart the printer after applying new settings]
check box when configuring the first printer so that you can confirm that a connection with the Wi-Fi access
point/router can be correctly established with the settings. For more information, see Communication
Settings (PJ-762/PJ-763/PJ-763MFi/PJ-773 Only) on page 48.
d Repeat steps a – c for all the printers whose settings you wish to change.
Important
If the IP address is set to [STATIC], the printer’s IP address will also be changed to the same address as
the first printer.
Change the IP address if necessary.
Note
To save the current settings in a file, click [File] - [Export].
The same settings can be applied to another printer by clicking [File] - [Import], then selecting the
exported settings file. (See Communication Settings (PJ-762/PJ-763/PJ-763MFi/PJ-773 Only)
on page 48.)