Communication Settings (Windows only)
25
7
Export
Saves the current settings in a file.
• If the [Disable these settings] check box is selected, the settings in that tab are not saved.
• Exported files are not encrypted.
Tools menu 7
Option Settings
• Automatically restart the printer after applying new settings
If this check box is selected, the printer automatically restarts after communication settings are applied.
If this check box is cleared, printers must be manually restarted.
When configuring multiple printers, you can reduce the time required to change settings by clearing this
check box. In this case, we recommend selecting this check box when configuring the first printer so that
you can confirm that each setting is operating as intended.
• Automatically detects the connected printer, and retrieves the current settings.
If this check box is selected and a printer is connected to the computer, the printer is automatically
detected and the printer’s current settings are displayed in the [Current Status] page.
If the model of the connected printer is different than that of the printer shown in the [Printer] drop-down
list, the settings available on all tabs will change to match the connected printer.
Change Node Name
Allows each node name to be changed.
Reset to Default Communication Settings
Returns the communication settings to their factory defaults.
Help menu 7
Display Help
Displays the Help.
About
Displays the version information.
To Next Page
Loading...
