Communication Settings (Windows only)
30
7
Wireless Settings 7
1 Communication Mode
Select [Ad-hoc] or [Infrastructure].
Not all computers, mobile devices, and operating systems, may support Ad-hoc mode.
2 SSID (Network Name)
Click the [Search] button to display the SSID selections in a separate dialog box.
3 Channel
Select from the displayed options.
4 Authentication Method/Encryption Mode
The supported encryption modes for the various authentication methods are as shown in Communication
Modes and Authentication Methods/Encryption Modes on page 31.
5WEP Key
You can only specify a setting when WEP is selected as the encryption mode.
6 Passphrase
You can only specify a setting when WPA2-PSK, or WPA/WPA2-PSK is selected as the authentication
method.
7 User ID/Password
You can only specify settings when LEAP, EAP-FAST, EAP-TTLS or EAP-TLS is selected as the
authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a client
certificate must be registered. To register a certificate, connect to the printer from a web browser, and then
specify the certificate. For details on using a web browser, see Web Based Management on page 18.
8 Display the key and password on-screen
If this check box is selected, keys and passwords will be displayed in plain text (non-encrypted text).
1
3
5
6
4
8
2
7
To Next Page
Loading...
