Brother PT-E550W - Wireless Settings; Communication Modes and Authentication Methods;Encryption Modes

Communication Settings (Windows only)
31
7
Communication Modes and Authentication Methods/Encryption Modes 7
 When [Communication Mode] is set to [Ad-hoc]
 When [Communication Mode] is set to [Infrastructure]
IMPORTANT
To perform higher level security settings:
When performing certificate verification with EAP-FAST, PEAP, EAP-TTLS or EAP-TLS authentication
methods, the certificate cannot be specified from the [Printer Setting Tool]. After the printer has been set
so that it can connect to the network, specify the certificate by accessing the printer from a web browser.
For details on using a web browser, see Web Based Management on page 18.
Authentication Method Encryption Mode
Open System None / WEP
Authentication Method Encryption Mode
Open System None / WEP
Shared Key WEP
WPA2-PSK AES
WPA/WPA2-PSK TKIP+AES/AES
LEAP CKIP
EAP-FAST/NONE TKIP / AES
EAP-FAST/MS-CHAPv2 TKIP / AES
EAP-FAST/GTC TKIP / AES
PEAP/MS-CHAPv2 TKIP / AES
PEAP/GTC TKIP / AES
EAP-TTLS/CHAP TKIP / AES
EAP-TTLS/MS-CHAP TKIP / AES
EAP-TTLS/MS-CHAPv2 TKIP / AES
EAP-TTLS/PAP TKIP / AES
EAP-TLS TKIP / AES