To Next PageTo Next PageWhy does my Brother QL-1050 QL-1060N pause and continue printing via USB?
When the Brother Label Maker (QL-1060N only) pauses and then continues printing via the USB cable, check if the printer is set for sequential printing. If it is, set the print mode to buffered printing. Alternatively, disconnect the LAN cable until USB printing is completed.
General| Print technology | Direct thermal |
|---|---|
| USB port | Yes |
| Standard interfaces | USB 2.0, Serial |
| USB 2.0 ports quantity | 1 |
| Tape type | DK |
| Internal memory | 2 MB |
| Number of styles | 6 |
| Built-in barcodes | EAN128, EAN13, EAN8, PDF417, QR Code, UPC-A, UPC-E |
| Tape size | 62 mm |
| Dimensions (WxDxH) | 170 x 220 x 147.5 mm |
| Bundled software | P-touch editor |
| Maximum label width | 102 mm |
| Maximum label length | 3 m |
| Minimum RAM | 128 MB |
| Minimum storage drive space | 70 MB |
| Compatible operating systems | Windows 2000/XP/Vista Mac OS 10.1-10.4.7 |
Weight and Dimensions| Weight | 1700 g |
|---|
Details the two-year limited warranty, what's covered, exclusions, and how to get service.
Provides critical safety instructions for operating and handling the printer to prevent injury or damage.
Step-by-step instructions for correctly loading the DK Roll media into the printer.
Details the procedure for safely connecting the printer to a power source and electrical outlet.
Outlines essential maintenance tasks including print head, roller, and label outlet cleaning.
Provides solutions for common printing problems, error messages, and connection issues.
