Brother QL-1060N - Service Manual

Brother QL-1060N

121 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

P-touch

SERVICE MANUAL

MODEL: QL-1060N

Table of Contents

Table of Contents3
Chapter I Specifications6
Mechanical Specifications6
- External Appearance6
- Keyboard6
- Display6
- Printing Mechanism7
- Thermal Tape7
- Cutter8
- PC Interface8
Electronics Specifications8
- Power Supply8
Chapter II Theory of Operation9
Outline of Mechanisms9
- Print Mechanism9
- Press Contact and Release Mechanism of Thermal Head10
- Tape Feed Mechanism11
- Automatic Tape Full Cutter Mechanism12
- Cover Open (Cover Lock) Sensor13
Outline of Control Electronics14
- Main PCB14
- Media Position Detect Sensor PCB (Tape Sensor14
- Key, LED PCB (SB PCB15
- Cutter Home Position Sensor15
- Media Feed Motor (Tape Feed Motor15
- Full Cutter Motor15
- Thermal Head15
Main Pcb16
- Logic Components18
- Key, LED Circuit19
- Head and Motor Power Supply ON/OFF Circuit20
- Full Cutter Motor Driver Circuit and Media Feed Motor Driver Circuit21
- Media Type Sensor Circuit, Media Position Detect Sensor Circuit and Cover Open Sensor Circuit22
- Head Temperature Detect Circuit26
- Cutter Home Position Sensor Circuit26
- Reset Circuit26
- USB Interface Circuit27
- RS232C Interface Circuit27
- LAN Interface Circuit28
Chapter III Disassembly and Reassembly29
Safety Precautions29
Tightning Torque Lists30
Lubrication Points List31
Disassembly Procedure33
- 1 ] Removing the Top Cover ASSY and Thermal Tape33
- 2 ] Disassembling the Top Cover ASSY35
- 3 ] Removing the Upper Cover ASSY37
- 4 ] Removing the Power Supply PCB and Main PCB40
- 5 ] Removing the Front Cover, Panel Cover and Front Side Cover45
- 6 ] Removing the Cutter Unit ASSY and Mecha ASSY47
- 7 ] Disassembling the Panel Cover48
- 8 ] Disassembling the Mecha ASSY49
Reassembling Procedure55
- 1 ] Reassembling the Mecha ASSY55
- 2 ] Installing the Panel Cover62
- 3 ] Installing the Mecha ASSY and Cutter Unit ASSY63
- 4 ] Installing the Front Side Cover, Panel Cover and66
- 5 ] Installing the Upper Cover ASSY69
- 6 ] Installing the Power Supply PCB and Main PCB71
- 7 ] Reassembling the Top Cover ASSY76
- 8 ] Installing the Top Cover ASSY and Thermal Tape78
- 9 ] Demonstration Print and Final Check80
Chapter IV Troubleshooting and Error Message80
Precautions81
After Repairing81
Error Message82
Troubleshooting Flows83
- 1 ] Printing Is Performed with Specific Dots Omitted83
- 2 ] the Tape Is Not Detected Correctly84
- 3 ] LED Does Not Turn on85
- LED Doe Not Turn On.85
- 4 ] no Printing Is Performed86
- 5 ] the USB Interface Malfunction87
- 6 ] the RS232C Interface Malfunction88
- 7 ] the Ethernet Interface Malfunction89
- 8 ] the Tape Is Not Cut90
- 9 ] the Tape Is Not Fed Correctly91
- 10 ] the Tape Is Fed, but the Error Message Appears Shortly92
Appendix 1 Maintenance Software Operation93
APPENDIX 1.1 Role and Use Procedure of the Reset Software Tool (Ql1060Ntstreset.exe)94
APPENDIX 1.2 Setting and Use Procedures of the Maintenance Software Tool (Ql1060Ntstse.exe)95
APPENDIX 1.3 Role and Use Procedure of the VR Adjustment Tool (Ql1060Ntstvradjust.exe)116

Other manuals for Brother QL-1060N

Network User's Guide42 pages

User Guide42 pages

Setup & Operation Guide121 pages

Set Up And Operation Guide61 pages

Related product manuals

Preview: Brother QL-1050

Brother QL-1050

Preview: Brother QL-1050N

Brother QL-1050N

Preview: Brother P-Touch QL-1050

Brother P-Touch QL-1050

Preview: Brother &trade; QL-1050

Brother &trade; QL-1050

Preview: Brother QL-1100

Brother QL-1100

Brother QL-1100c

Preview: Brother QL-1110NWB

Brother QL-1110NWB

Preview: Brother QL-700

Preview: Brother QL-800

Preview: Brother QL-570

Preview: Brother ql-560

Preview: Brother P-touch QL-700

Brother P-touch QL-700