To Next PageTo Next PageHow to fix Brother Printer if label is not ejected properly?
If the label is not ejected properly after printing from your Brother printer, first check that the ejection path of the label is not blocked. Next, remove and reinstall the DK Roll to ensure it is set properly. Finally, make sure that the DK Roll cover is closed correctly.
What to do if labels are jammed in the cutter of my Brother Label Maker?
If labels are jamming in the cutter or not ejecting correctly after printing with your Brother Label Maker, the roller may have dirt or lint preventing it from rolling freely. Use a Cleaning Sheet to clean the roller.
Why doesn't the power button light up on my Brother QL-570?
If the power button on your Brother Label Maker isn't lighting up, first ensure the power cord is properly plugged in. If it is, try plugging it into a different electrical outlet.
What to do if my Brother Label Maker QL-570 does not print?
If your Brother QL-570 Label Maker isn't printing or you're getting a printing error, make sure the USB cable is correctly connected. Also, check that the DK Rolls are installed properly and that there's enough roll remaining. Ensure the DK Roll compartment cover is closed. If problems persist, turn the Brother QL-570 off and on again.
Why is the power button not lit on my Brother QL-570?
If the power button on your Brother Label Maker is not lit, check that the power cord is inserted correctly. If it is, try plugging it into another electrical outlet.
How to reset Brother QL-580N Label Maker and delete data?
To reset your Brother QL-580N Label Maker, press and hold the ON/OFF button to switch the machine OFF. Then, hold down the ON/OFF button for two seconds. Continue holding down the ON/OFF button, and press the CUT button six times. The machine will reset, deleting all transferred data from your PC and restoring it to factory settings.
How to fix Brother QL-570 QL printer when it does not print?
If your Brother QL Label Maker isn't printing, ensure the cable is securely connected and the DK Roll is installed correctly with enough roll remaining. Also, verify that the DK Roll compartment cover is closed. If a print or transmission error occurred, turn the printer off and on again. If the issue persists, consider contacting your Brother dealer.
General| Print technology | Direct thermal |
|---|---|
| Vertical printing | Yes |
| Maximum resolution | 300 x 300 DPI |
| Maximum print height | 59 mm |
| Ethernet LAN | No |
| Dimensions (WxDxH) | 134 x 208 x 141 mm |
| Product color | Blue, Silver |
| Maximum label width | 62 mm |
| Maximum label length | 1 m |
| Tape type | DK |
| Tape cutting | Automatic |
Weight and Dimensions| Weight | 1130 g |
|---|
