Brother QL-570N User Manual (English)

Questions and Answers:

M
michaellopezSep 4, 2025
What to do if Brother Printer shows a data transmission error?
- A
  Ashley HillSep 4, 2025
  If a data transmission error appears on your personal computer when using the Brother QL printer, verify that the correct port is selected in the Printer Properties dialog box under the “Print to the following port” list. Also, check if the printer is in cooling mode (orange flashing LED). If so, wait until the LED stops flashing before trying to print again. Finally, if other users are printing large amounts of data via network, try again after their jobs are completed.
C
Connie LynchAug 23, 2025
What to do if my Brother Printer QL does not print?
- J
  Jacob LawsonAug 23, 2025
  If the Brother QL printer does not print or shows a printing error, first, ensure the cable is securely connected and the DK Roll is correctly installed. Also, check if there is enough roll remaining and that the DK Roll compartment cover is closed. If problems persist, turn the printer off and on again. If the issue continues, it may be necessary to contact your Brother dealer.
M
Megan BurnsSep 2, 2025
How to fix Brother QL-570N Label Maker cutter error?
- M
  Michelle MillerSep 2, 2025
  If a cutter error occurs with your Brother Label Maker, keep the DK roll compartment cover closed and press the ON/OFF button. The cutter will move back to its normal position, and the machine will turn off automatically. After the machine is off, inspect the cutter unit and remove any paper jam.
R
rodney93Sep 1, 2025
Why does my Brother Printer print labels with streaks?
- J
  Joanna AguilarSep 1, 2025
  If the printed label from your Brother printer contains streaks or poor quality characters, or the label is not fed correctly, the print head or roller may be dirty. Clean the roller, as lint or dirt from it might be stuck on the printer head.
D
Dennis HicksAug 31, 2025
How to fix Brother Printer if label is not ejected properly?
- H
  hhoustonAug 31, 2025
  If the label is not ejected properly after printing from your Brother printer, first check that the ejection path of the label is not blocked. Next, remove and reinstall the DK Roll to ensure it is set properly. Finally, make sure that the DK Roll cover is closed correctly.
A
Anna AdamsAug 30, 2025
How to reset my Brother QL-570N Label Maker and delete transferred data?
- J
  Jennifer MartinAug 30, 2025
  To reset your Brother Label Maker, press and hold the ON/OFF button to switch the machine OFF. Then, hold down the ON/OFF button for two seconds. Continue holding down the ON/OFF button, and press the CUT button six times. The machine will then reset, deleting all transferred data from the PC and resetting the machine to factory settings.
C
Craig SchultzAug 29, 2025
Why is my Brother QL-570N not turning on even though the power cord is plugged in?
- R
  Ryan FranklinAug 29, 2025
  Check that the power cord is properly inserted into your Brother Label Maker. If it is, try plugging it into a different electrical outlet to ensure the issue isn't with the current outlet.
Z
Zachary MasonAug 28, 2025
What to do if my Brother QL-570N Label Maker has a print or transmission error?
- A
  Alexandria FordAug 28, 2025
  If a print or transmission error occurs with your Brother QL printer, turn it off and then on again. If the problem persists, it is recommended to contact your Brother dealer.
J
Julia ClarkAug 27, 2025
What to do if there is a cutter error on my Brother QL-570N Label Maker?
- U
  uchapmanAug 27, 2025
  If your Brother Label Maker displays a cutter error, keep the DK roll compartment cover closed and press the ON/OFF button. The cutter will move back to its normal position and turn the machine OFF automatically. After the machine is OFF, inspect the cutter unit and remove any paper jam.
T
Tiffany StephensAug 27, 2025
Why is the power button not lit on my Brother QL-570N?
- D
  davisdebbieAug 27, 2025
  If the power button on your Brother Label Maker is not lit, check that the power cord is inserted correctly. If it is, try plugging it into another electrical outlet.