Why does my Brother Printer print labels with streaks?
To address streaks, poor quality characters, or incorrect label feeding on your Brother Printer, the print head or roller might be dirty. Clean the roller, as lint or dirt from it may be stuck on the print head.
What to do if Brother Printer does not print?
To resolve a Brother Printer that is not printing or is showing a printing error: * Ensure the cable is securely connected. * Verify that the DK Roll is correctly installed; reinstall if necessary. * Check that there is sufficient roll remaining. * Confirm the DK Roll Compartment Cover is closed. * If a print or transmission error occurred, turn the printer off and then on again. * If connected via a USB hub, try connecting directly to the computer or another USB port.
What to do if a data transmission error appears on the computer for Brother Printer?
If a data transmission error appears on the computer when using your Brother Printer, it might be because the printer is in cooling mode. Wait until the Status LED stops flashing in orange, and then try printing again.
Why printed barcodes cannot be read on Brother Printer?
To resolve the issue of printed barcodes not being readable on your Brother Printer: * Print labels so that barcodes are aligned with the print head. * Try using another scanner. * Print barcodes with Print Quality options set to Give priority to print quality.
What to do if unable to reset an error on Brother Printer?
To resolve an error on your Brother Printer: 1. Open the DK Roll Compartment Cover, and then close it. 2. If the error is not reset, press the Cutter Button or Feed Button. 3. If the error is not reset, turn the printer off, and then turn it on again.
How to cancel printing job on Brother Printer?
To cancel the current printing job on the Brother Printer, ensure that the printer is on and press the Power Button.
What to do if the label is not ejected correctly after printing with Brother Printer?
To address the issue of the label not ejecting correctly after printing with your Brother Printer: * Ensure that the Label Output Slot is not blocked. * Verify that the DK Roll is set correctly by removing and reinstalling it. * Ensure that the DK Roll Compartment Cover is closed correctly.
What to do if the Status LED is not lit on Brother Printer?
To troubleshoot the Status LED not being lit on your Brother Printer, check that the AC Power Cord is inserted correctly. If it is, try plugging it into another electrical socket.
Why is the P-touch Add-In icon not displayed in Microsoft Word for Brother Printer?
To resolve the issue of the P-touch Add-In icon not being displayed in Microsoft Word for Brother Printer, quit Microsoft Outlook and restart Microsoft Word. The Microsoft Word Add-In does not work when Microsoft Word is started from Microsoft Outlook due to program limitations.
What to do if layout style was not updated on Brother Printer after replacing the Roll?
To address the layout style not being updated after replacing the Roll while the Add-In feature was activated on your Brother Printer, close P-touch Editor to exit the Add-In, and then reactivate the Add-In.
General| Color | - |
|---|---|
| Print technology | Direct thermal |
| Vertical printing | Yes |
| Maximum resolution | 300 x 300 DPI |
| Maximum print height | 59 mm |
| Maximum printing width | 62 mm |
| Ethernet LAN | No |
| Product color | Black, White |
| Quantity outer carton | 3 pc(s) |
| Tape type | DK |
| Tape cutting | Automatic |
| Built-in barcodes | CODABAR (NW-7), EAN128, EAN13, EAN8, Interleaved 2/5, PDF417, POSTNET, UPC-A, UPC-E |
| Maximum label length | 1 m |
| Package depth | 184.15 mm |
| Package width | 260.35 mm |
| Package height | 234.9 mm |
| Package weight | 1995 g |
| Quantity per pack | 1 pc(s) |
| Master (outer) case width | 274 mm |
| Master (outer) case length | 555 mm |
| Harmonized System (HS) code | 84433210 |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| AC adapter output current | 1.7 A |
| Bundled software | Software, USB Cable, Power Cord, Quick Setup Guide, Documentation, Starter rolls: DK-1201 Die-cut Standard Address Labels (100 labels), plus DK-2205 2.4\ |
Weight and Dimensions| Depth | 221 mm |
|---|---|
| Width | 128 mm |
| Height | 153 mm |
| Weight | 1100 g |
To Next Page
