Printing Labels Using P-touch Template
80
5
You can use P-touch Editor to create and print a label with a single barcode for step f.
Example:
h Scan a barcode that contains the keyword to look up in downloaded database from step d.
Example:
i Scan the "Delimiter" barcode to send the command to start searching the downloaded database for the
keyword that was scanned.
j Scan the "Begin printing" barcode to send the command to start printing.
You can use P-touch Editor to create and print a label with a single barcode for steps i and j.
Example:
k The Label Printer will print the template with the data inserted from the database record found with the
keyword that was scanned.
To Next Page
Loading...
