To Next PageTo Next PageWhy does my Brother S-6200A Sewing Machine stop during sewing?
If your Brother Sewing Machine stops during sewing, it might be due to the fixed stitch key being turned on, so press the fixed stitch key to turn the indicator off. Also, check the power supply, as a low voltage can cause the machine to stop.
Why are the upper and lower threads breaking on my Brother S-6200A Sewing Machine?
If the upper and lower threads are breaking on your Brother Sewing Machine, there could be several reasons: * The needle might be bent or broken: Replace the needle if it is damaged. * Incorrect needle installation: Install the needle correctly. * Improper threading: Thread the machine correctly. * Tension issues: Adjust the upper or lower thread tension. * Thread take-up spring: Adjust the position of the thread take-up spring. * Damaged parts: Smooth damaged parts or replace them. * Damaged thread path: Smooth or replace the damaged part.
How to fix Brother S-6200A Sewing Machine if it does not operate at high speed?
If your Brother Sewing Machine is not operating at high speed, check the sewing speed setting or backtack speed setting. Set the maximum sewing speed to a higher speed if needed.
General| Type | Industrial Sewing Machine |
|---|---|
| Lubrication | Automatic |
| Free Arm | No |
| Maximum Stitch Length | 4 mm |
| Application | Apparel |
| Stitch Length | 4mm |
| Needle | DB x 1 |
| Presser Feet | Standard Presser Foot |
