EasyManuals Logo

Brother VERSION 0 MFC-290C User Manual

Brother VERSION 0 MFC-290C
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #118 background imageLoading...
Page #118 background image
108
Note
If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
If the print head has stopped in the right
corner as shown in the illustration, you
cannot move the print head. Hold down
Stop/Exit until the print head moves to the
middle. Then unplug the machine from the
power source, and take out the paper.
If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
g Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
h Push the paper tray firmly back into the
machine. While holding the paper tray in
place, pull out the paper support until it
clicks and unfold the paper support flap.
Note
Make sure you pull out the paper support
until it clicks.
1
2
3

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother VERSION 0 MFC-290C and is the answer not in the manual?

Brother VERSION 0 MFC-290C Specifications

General IconGeneral
Scanner TypeFlatbed
Output Capacity50 sheets
Memory32 MB
FunctionsCopier, Fax, Printer, Scanner
Printing TechnologyInkjet
PC ConnectivityUSB
Media TypePlain paper, envelopes, transparencies
Paper SizesLetter, Legal, Executive, A4, A5, A6, Envelopes

Related product manuals