Brother VERSION 0 MFC-290C User Manual

51
9
9
Fax reports 9
You need to set up the Transmission
Verification Report and Journal Period using
the Menu key.
Transmission Verification
Report 9
You can use the Transmission Report as
proof that you sent a fax. This report lists the
time and date of transmission and whether
the transmission was successful (OK). If you
choose On or On+Image, the report will print
for every fax you send.
If you send a lot of faxes to the same place,
you may need more than the job numbers to
know which faxes you must send again.
Choosing On+Image or Off+Image will print
a section of the fax's first page on the report
to help you remember.
When the Verification Report is turned Off or
Off+Image , the Report will only print if there
is a transmission error, and the fax could not
be sent.
If you choose On+Image or Off+Image the
image will only appear on the Transmission
Verification Report if Real Time Transmission
is set to Off. (See Real time transmission
on page 30.)
a Press Menu, 2, 3, 1.
b Press a or b to choose Off+Image, On,
On+Image or Off.
Press OK.
c Press Stop/Exit.
Fax Journal (activity report) 9
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or
24 hours, 2 or 7 days). If you set the interval
to Off, you can still print the report by
following the steps in Reports on page 52.
The default setting is Every 50 Faxes.
a Press Menu, 2, 3, 2.
b Press a or b to choose an interval.
Press OK.
(If you choose 7 days, the LCD will ask
you to choose the first day for the 7-day
countdown.)
 6, 12, 24 hours, 2 or 7 days
The machine will print the report at
the chosen time and then erase all
jobs from its memory. If the
machine's memory is filled with the
maximum 200 jobs before the time
you chose has passed, the machine
will print the Journal early and then
erase all jobs from the memory. If
you want an extra report before it is
due to print, you can print it without
erasing the jobs from the memory.
 Every 50 Faxes
The machine will print the Journal
when the machine has stored
50 jobs.
c Enter the time to start printing in 24-hour
format.
Press OK.
(For example: enter 19:45 for 7:45 PM.)
d Press Stop/Exit.
Printing Reports 9

Brother VERSION 0 MFC-290C Specifications

General

Scanner Type	Flatbed
Output Capacity	50 sheets
Memory	32 MB
Functions	Copier, Fax, Printer, Scanner
Printing Technology	Inkjet
PC Connectivity	USB
Media Type	Plain paper, envelopes, transparencies
Paper Sizes	Letter, Legal, Executive, A4, A5, A6, Envelopes