Chapter 2
14
Handling and using print
media 2
Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
Avoid touching the shiny (coated) side of
photo paper. Load photo paper with the
shiny side facing down.
Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
You can only print on both sides of the
paper with PC printing. (See Printing for
Windows
®
in the Software User's Guide
on the CD-ROM).
Improper Setup
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
12mm or greater
• Extremely shiny and highly textured
paper
• Paper that cannot be arranged uniformly
when stacked
• Paper made with a short grain
Paper capacity of the paper tray 2
Up to 50 sheets of 80 gsm or 20 lb A4 paper.
Transparencies and photo paper must be
picked up from the paper tray one page at
a time to avoid smudging.
1
1
To Next Page
Loading...
Need help?
General
