32
6
Receive modes 6
Choosing the Receive Mode 6
By default, your machine will automatically receive any faxes that are sent to it. The diagram below
will help you choose the correct mode. For more detailed information on the receive modes see
Using receive modes on page 33 and Receive mode settings on page 34.
To set a receive mode follow the instructions below.
a Press Menu, 0, 1.
b Press a or b to choose Fax Only, Fax/Tel, External TAD or Manual.
Press OK.
c Press Stop/Exit.
The LCD will display the current receive mode.
1 Current receive mode
Fax: Fax Only
Receiving a Fax 6
Do you want to use the telephone features of your machine (if available) or
an external telephone or external telephone answering device connected on the
same line as the machine?
Yes
Fax Only
No
No
No
Manual
Yes
External TAD
Fax/Tel
Are you using the voice message function of
an external telephone answering device?
Do you want the machine to answer fax and
telephone calls automatically?
Yes
12/10 11:53 Fax12/10 11:53 Fax
1
To Next Page
Loading...
Need help?
General
