Telephone and External devices
47
7
Remote Deactivation Code 7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double) ring after the initial ring delay. If you
pick up the call on an extension telephone
you can turn the F/T ring off by pressing #51
(#9 1 for New Zealand) (make sure you press
this between the rings).
If the machine answers a voice call and
pseudo/double rings for you to take over, you
can take the call at the external telephone by
pressing Hook.
Changing the remote codes 7
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 51 (l 9 1 for
New Zealand). The preset Remote
Deactivation Code is #51 (#9 1 for New
Zealand). If you want to, you can replace
them with your own codes.
a Press Menu, 2, 1, 4.
1.Setup Receive
4.Remote Codes
b Press a or b to choose On (or Off).
Press OK.
c Enter the new Remote Activation Code.
Press OK.
d Enter the new Remote Deactivation
Code.
Press OK.
e Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers
0-9, , #.
• Remote Codes might not work with some
telephone systems.
To Next Page
Loading...
