Brother VERSION 0 MFC-290C User Manual

Chapter 7
44
Viewing Caller ID List 7
Your machine stores information for the last
thirty calls in the Caller ID list. You can view
or print this list. When the thirty-first call
comes in to the machine, it replaces
information about the first call.
a Press Menu, 2, 0, 4.
0.Miscellaneous
4.Caller ID
b Press a or b to choose Display#.
Press OK.
The Caller ID of the last call will appear
on the display. If no ID is stored, the
beeper will sound and No Caller ID
will appear on the display.
c Press a or b to scroll through the Caller
ID memory to choose the Caller ID you
want to view.
Press OK.
The LCD shows the caller's number, the
date, and time of the call.
d Do one of the following:
 To return to the Caller ID listing,
press a or b.
 To finish viewing, press Stop/Exit.
Printing Caller ID List 7
a Press Menu, 2, 0, 4.
0.Miscellaneous
4.Caller ID
b Press a or b to choose Print Report.
Press OK.
If no ID is stored, the beeper will sound
and No Caller ID will appear on the
LCD.
c Press Mono Start or Colour Start.
d When the printing has finished, press
Stop/Exit.
Connecting an external
TAD (telephone
answering device)
7
You may choose to connect an external
answering device. However, when you have
an external TAD on the same telephone line
as the machine, the TAD answers all calls and
the machine ‘listens’ for fax calling (CNG)
tones. If it hears them, the machine takes over
the call and receives the fax. If it does not hear
CNG tones, the machine lets the TAD
continue playing your outgoing message so
your caller can leave you a voice message.
The TAD must answer within two rings (the
recommended setting is two rings). The
machine cannot hear CNG tones until the
TAD has answered the call, and with four
rings there are only 8 to 10 seconds of CNG
tones left for the fax ‘handshake’. Make sure
you carefully follow the instructions in this
guide for recording your outgoing message.
We do not recommend using the toll saver
feature on your external answering machine if
it exceeds five rings.
Note
If you do not receive all your faxes, cut the
Ring Delay setting on your external TAD.
1TAD
When the TAD answers a call, the LCD shows
Telephone.
1
1
(Example for Australia)

Brother VERSION 0 MFC-290C Specifications

General

Scanner Type	Flatbed
Output Capacity	50 sheets
Memory	32 MB
Functions	Copier, Fax, Printer, Scanner
Printing Technology	Inkjet
PC Connectivity	USB
Media Type	Plain paper, envelopes, transparencies
Paper Sizes	Letter, Legal, Executive, A4, A5, A6, Envelopes