BRUEL & KJAER VIBROCONTROL 920 - Mounting Methods and Dimensions

Mounting and Installation VIBROCONTROL 920
VC920E / C102833.002 / V 13
Page 23 / 33
6.4 Mounting
Real panel mounting 2 M4 x 15 screws or
2 M5 x 15 screws
Rail mounting 35 mm profile rail (EN 50 022)
• Dimensions 150 mm x 78 mm x 115 mm (W x H x D)
Note!
The assembly of the VIBROCONTROL 920 must not be undertaken in areas
with permanent vibrations. Possibly a vibration-isolated installation must be
implemented.
W
D