Damage to RF Coils.
Handle RF Coils with great care.
Do not use RF Coils in different positions/mountings or with different loads than
intended.
Wet-cleaning of RF Coils should be avoided if possible. Any liquids in RF Coils
must be completely evaporated before using the RF Coil.
Do not use excessive temperature (≤ 40°C) or air ventilation for drying RF Coils after
cleaning.
Risk of personal injury.
When using narcotic gases (medical gases),
Pay attention to the local regulations. In particular you must not exceed the
maximum allowed concentration for medical gases in a laboratory environment.
Carry out appropriate compliance with the regulations;
Allow for sufficient fresh air and use extraction system for anesthetic gases;
Make sure, that the scavenging system is turned on (if present).