Bruker ICON - 5.2.3 Mounting the Animal Beds to the Basic Holder; 5.2.3.1 Overview - Animal Bed

Icon System Manual T02985_02_03 67
MRI System Operation
 During the registration a subject is assigned to the planned study, possibly within a
project.
 Data acquisition (and reconstruction) is done on the basis of predefined protocols
and scan programs
 The reconstruction and evaluation can be performed manually or automated
 Parameter, images and results of an experiment are summarized in acquisition
reports
5.2.3 Mounting the Animal Beds to the Basic Holder
Before using the animal beds get familiar with all features and connections, described in
the following sections.
5.2.3.1 Overview – Animal Bed
As an example, Figure 5.2 shows the schematic layout of the mouse body animal bed
for fix RF Coils. This animal bed have following connections:
 Isofluorane anesthesia supply (4) via the tooth bar (3) into the anesthesia mask (2)
 Scavenging (5)
 Two warm water tubes (6) (in-/outlet) for animal warming
Figure 5.2: Mouse body animal bed
(1) Mouse animal bed; (2) Anesthesia mask; (3) Tooth bar; (4) Anesthesia connection to tooth bar;
(5) Scavenging; (6) Warm water tubes (in- and outlet) for animal warming