EasyManua.ls Logo

Brute FT Series - Page 8

Brute FT Series
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 8
2.2 Specications, 199 MBH
Model Name FTHW199
Gas Input Rate
MAX 199,000 Btu/h
MIN 19,900 Btu/h
Installation Indoor / Wall hung type
Flue System
Sealed Combustion Direct / Single Vent / Concentric
Vent
Vent Run / Vent Material
2˝(50ft), 3˝(100ft) Schedule 40 CPVC, PP, PVC
Orice Size
NG 0.326˝ (8.3mm)
LP 0.250” (6.35 mm)
Gas Supply Pressure
NG 3.5˝ WC to 10.5˝ WC
LP 8.0˝ WC to 13.0˝ WC
Manifold Pressure
Gas type
LP NG
Max re
-0.169” WC (+/- 0.01) -0.129” WC (+/- 0.01)
Min re
-0.015” WC (+/- 0.001) -0.015” WC (+/- 0.001)
Power Supply
Main Supply 120V 60Hz / 4A
Maximum Power
Consumption
160W
Ignition System Direct Electronic Ignition / Automatic Flame Sensing
Burner System
Single Orice Premixed Fuel Modulation Metal Ceramic
Infrared
Gas Valve System Combination modulating (Current proportional)
Dimensions W19 ⅝˝ - H32.0˝ – D16 ¼˝
Shipping Weight 118 lbs (54 kg)
Main Controller / Control Display NGTB-900CP / P-950EH
Water Pressure Min 15 ~ Max 30 PSI
Connection Sizes
CH Supply/Return 1 ¼˝ NPT
Gas Inlet 3/4˝ NPT
Materials
Casing Cold Rolled Carbon Steel
Heat Exchanger
Primary Heat Exchanger : Stainless Steel
Sub Heat Exchanger : Stainless Steel
Safety Devices
Optical Flame Sensor, Low Water Cut O󰀨 Sensor, Flue
Gas Limit Sensor, Overheat Cut O󰀨 Device,
Gas Valve Operation Detector,
Water Temperature Sensor, Over-heat Limit Switch,
Air Pressure Sensor

Table of Contents