14
QUICK START
Holding the temperature
Here’s how to override your programmed temperature settings and hold the
temperature at a specific setting without the temperature changing during the next
programmed period.
1. Open the door.
2. Press the schedule button at the top. The arrow will
move to the word hold under the button.
3. The screen displays the set temperature in the lower
right. To change that temperature, press the up or down
button on the right. The temperature will stay at the set-
ting you selected until you release the hold.
4. To change the heating temperature when the cooling tem-
perature is displayed – and vice versa – press the mode
button at the top of the screen until the arrow moves to
your choice – heat or cool.Thenpresstheup or down
button on the right to reach your desired temperature set-
ting.
5. To return the temperature to the pre--set level for that time
period, press the mode button until the arrow moves to
follow schedule.
6. Close the door.
To Next Page
Loading...
Need help?
General
