32
OPERATING THE THERMOSTAT
3. Press the up or down button to change this auto humid-
ify set at number (1 through 9). If there is too much
condensation on the windows, select a number lower
than 5. If there seems to be a lot of static electricity,
which often means the air is too dry, select a number
higher than 5. If your home is newer and has quality
windows that create a “tight” home, try a higher setting.
If your home is older, you might need a lower setting.
4. Close the door.
How to turn off the humidify or dehumidify feature
Here’s how to turn off the humidify and/or dehumidify features.
1. Open the door. To turn off either feature, press the but-
ton under the word humidify or dehumidify.
2. Press the mode button until the screen says OF.
3. Close the door.