Quick Start
10
Setting the time and date
You must set the time and date before you can use any
of the thermostat’s programming features.
1. Open the door.
2. Press the
set button on the left. The screen will show
the word
clock on the left and the time on the bottom.
3. To set the hour, press the
button underneath the hour,
then press the
up or down button on the right. Stop at
the desired hour.
4. To set the minutes, press the
button underneath the
minutes
, then press the up or down button on the right.
Stop at the desired number.
5. To set the date, press the
set button until the screen
displays the word
calendar and the date on the bottom
of the screen.
To Next Page
Loading...
