Advanced Programming Options
40
Adjusting or turning off the continuous backlighting
Your thermostat may feature a low level amount of backlighting until
you press any button, which increases the lighting temporarily. You can
adjust the intensity of the backlighting or turn if off completely. The
range is off (OF) 1 to 5 brightness. Here’s how.
1. Open the door.
2. Press and hold the
buttons underneath the heat and
cool setpoints
simultaneously (the two bottom buttons
on the right) until the screen displays the reset
reminders and
01 in the lower right corner.
3. Press the
up arrow button until 01 changes to 03 with
the number
3 (default backlight) next to it.
4. To increase backlight level, press the
rightmost lower
button
then press the up arrow button until 4 or 5
appears. To decrease the backlight level, press the
rightmost lower button then press the down arrow
button
until 2, 1 or OF (off) appears.
To Next Page
Loading...
Need help?
General
