Advanced Programming Options
47
Turning on the programmable fan feature
When you turn on the programmable fan feature using these
instructions, you can program the fan selection to “auto” or “on”
for each of the program schedule periods. (Learn more
about this on page 26.)
1. Open the door.
2. Press and hold the
buttons underneath the heat and
cool setpoints
simultaneously (the two bottom buttons
on the right) until the screen displays the reset
reminders and
01 in the lower right corner.
3. Press the
up arrow button until 01 changes to 07 with
OF (fan mode) next to it.
4. To turn the fan on, press the
rightmost lower button
then press the up arrow button until the screen
displays
ON. To turn the fan off, press the rightmost
lower button
then press the down arrow button until
the screen displays
OF (off).
5. Press the
done button.
6. Close the door.
To Next Page
Loading...
Need help?
General
