Bryant Preferred User Manual

Advanced Programming Options
39
Changing from Fahrenheit to Celsius
Your thermostat is preset to display the temperature in
degrees Fahrenheit. You can change this to Celsius.
1. Open the door.
2. Press and hold the
buttons underneath the heat and
cool setpoints
simultaneously (the two bottom buttons
on the right) until the screen displays the reset
reminders and
01 in the lower right corner.
3. Press the
up arrow button until 01 changes to 02 with
F (Fahrenheit) next to it.
4. Press the
rightmost button under the F until C (Celsius)
appears.
5. Press the
done button.
6. Close the door.

Bryant Preferred Specifications

General

Wi-Fi	Yes
Energy Star Certified	Yes
Humidity Control	Yes
Air Filter Monitor	Yes
Warranty	5-year limited warranty
Display	Touchscreen
Programmability	7-day programmable
Power Source	Battery