Advanced Programming Options
46
Changing the number of programming periods
Your thermostat is preset with four time periods. You can change this
to two. Here’s how to change the number of periods in the day.
1. Open the door.
2. Press and hold the
buttons underneath the heat and
cool setpoints
simultaneously (the two bottom buttons
on the right) until the screen displays the reset
reminders and
01 in the lower right corner.
3. Press the
up arrow button until 01 changes to 06
with 4 (time periods) next to it.
4. Press the
rightmost lower button then press the
up arrow button until the screen displays 2.
5. Press the
done button.
6. Close the door.
To Next Page
Loading...
