Operating the Thermostat
33
3. Press the up or down button to change the setting.
It is factory-set at 26% for humidify and 60% for
dehumidify. It there’s too much condensation on the
windows, try a lower number. If the air is too dry, try a
higher number. If your home is newer and has quality
windows that create a “tight” home, try a higher setting. If your
home is older, you might need a lower setting. You can set the
humidity between 10% and 46%; the dehumidify range is from
46% to 66%.
4. Close the door.
Using auto humidify
The auto humidify feature automatically adjusts the amount
of humidity according to the outside temperature. It can be
manually adjusted when there is too much condensation
accumulating on windows or the air seems too dry. Here’s
how to switch to auto humidify and make adjustments.
1. Open the door. Press the
button under humidify. You
will see the current humidity settings.
2. Press the
mode button. You will see auto at the top,
the current humidity reading, and
5 set at, which is
To Next Page
Loading...
