To Next Page

To Previous Page

Programming the Thermostat

6. Set the cooling temperature for that time period by

pressing the

button under the cool set at: temperature

on the right and then pressing the

up or down button

until you reach the desired cooling temperature.

7. Repeat this process for each of the three remaining

time periods – day, evening and sleep – by first pressing

the

button under the four time periods to select the

time period with the arrow. To change the

start at time,

press the

button under the hour or minute, then press

the

up or down button, stopping on the desired time. To set the

heating temperature,

press the button under heat set at:, then press

the

up and down button, stopping on the desired temperature. To set

the cooling temperature, press the

button under cool set at:, then

press the

up or down button, stopping on the desired temperature.

8. To set the schedule for another day, press the

button

under the days of the week

on the left again until the

arrow is next to the day you want to program.

9. Repeat steps 4 through 7 to program that day.

10. Continue to repeat step 8, then steps 4 through 7 to program

remaining days.

Bryant Preferred User Manual

Questions and Answers: