To Next Page

To Previous Page

Programming the Thermostat

1. Press the schedule button at the top until the arrow

is next to

vacation.

2. You will see the next day’s date at the bottom of

the screen under the words

return on. There is a

box around the date. To set the date

(D) you will

return home, press the

up button and stop on the

desired date.

3. If you need to change the month

(M) for your return,

press the

button under the month on the screen. The

selection box will move to the month number.

4. Press the

up button to set the desired month.

5. Repeat this process to change the year

(Y)

if necessary.

6. Press the

done button. This will instruct the thermostat

to begin adjusting to these settings immediately.

7. Close the door.

Bryant Preferred User Manual

Questions and Answers: