If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Where to put your phone
• Place the base within
3 metres of a mains power
socket and 1.8 metres of a
phone socket so the cables
will reach.
• Make sure it’s at least
a metre away from
other electrical appliances
to avoid interference.
• Don’t place the phone or
base in a bathroom or
other humid area.
• The product works by
sending radio signals
between the handset and
base. The strength of the
signal depends on where you
position the base. Putting it
as high as possible can help
give you the best signal.
IMPORTANT
• Don’t connect the phone line
to a phone socket until the
handset is fully charged.
• The base station should
be plugged into the mains
power socket all the time.
Quick set-up guide4
1 Plug in
1. Your phone will come with the phone line cord
2. Plug the mains power adaptor into the base, with
the cable clipped in the groove provided.
3. Plug the other end of the power adaptor into the
wall power socket and switch it on.
1 2 3
To Next Page
Loading...
Need help?
General
