Answer machine
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
42
The default outgoing message is
Setting the answer mode
There are two answer machine types: Answer + Rec
and Answer only
messages to your answer machine. Answer only
doesn’t. Here’s how to set it.
1. Press
to display the handset menu. Use and
to get to Answ machine. Press .
2. Press
until you get to Answer mode and
press
.
3. Use the arrow buttons to choose the answer type
you want and press
.
4. You’ll then be asked to choose between your own
outgoing message or the one that came with the
phone. When you’ve decided, press
.
Setting the answer delay
Answer delay is the number of times the phone
will ring before the answer machine picks the call up
for you. You can choose from two to nine rings and
Toll saver.
If you’ve got Toll saver switched on, when you call in
to check your answer machine messages remotely,
it’ll only answer the call after six rings if you don’t
To Next Page
Loading...
Need help?
General
