BT BT2200 - Using the Answer Machine from the Base; Switching the Answer Machine on or off at the Base; Playing Messages Using the Base; Message Playback on the Base

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Help 47
• Make sure the handset is registered to the base. See page 43.
No display
 
• Recharge or replace the batteries.
Range icon ashes
• Make sure the handset is registered to the base. See page 43.
• Check that the mains power is correctly connected to the base.
• Check that the handset is within range of the base.
• If the batteries are low, place the handset on the base/charger to recharge.
You hear the busy tone when you press
• Make sure the handset is in range of the base.
• Another handset registered to your BT2200 base may be on the line.
No caller display number or name is displayed
 
• The caller may have withheld their number.
• The network might not have the caller’s number information.
• There isn’t an exact name or number match in your phonebook.
Check that you’ve stored the full STD dialling code.