If you experience any problems, please visit
6 Getting started
Location
You need to place your BT Converse 2300 within 3 metres of a telephone and
mains power socket so that the cables will reach.
Your BT Converse 2300 can be wall mounted, see ‘Wall mounting your phone’
page 32.
Setting up
1. Plug the lead of the mains power adaptor (item code 046397 white and
046406 black) into the socket marked
on the underside of the phone and
route the cable as shown.
Do not place your BT Converse 2300 in the
bathroom or other humid areas.
Other electrical equipment close to your
Converse could have an adverse effect on call
quality. If you experience buzzing during a call
try moving the Converse away from any electrical
equipment that may be nearby.
Only use the handset and telephone line cord and
the mains power adaptor supplied or this product
may not work.
To Next Page
Loading...
