5- 2 Service Guide LWE180, LWE200, LPE200, LPE240 © BT Europe AB
Preventive maintenance – P2 LPE 240
Maintenance schedule
T-code Valid from serial number Date Order number
660, 661, 662, 497 723984- 2005-05-11 225553-040
2550. Drive assembly
2550.1 Check for leakage
I
3
I
2550.2 Check oil level I
2550.3 Check for abnormal noise I
2550.4 Check mountings and play in the steering
bearings
I
2550.5 Change the oil in the drive transmission
L
4
L
2550.6 Lubricate the gear ring (Servo, Option) L
3100 Brakes
3100.1 Clean C
3100.2 Check for wear to the brake discs M
3100.3 Check for play in released position M
3500. Wheels
3500.1 Remove string and other detritus I
3500.2 Check for wear on the drive wheel I
3500.3 Check that the swivel wheels rotate and
swing freely
I
3500.4 Check for wear to the swivel wheels I
4110. Tiller arm
4110.1 Check for play on steering joints I
4110.2 Check the steering force I
4110.3 Check the gas cartridge's force I
4110.4 Check the adjustment of the steering chain,
lubricate
L/M
I: Inspect, correct and replace if necessary. T: Tighten C: Clean L: Lubricate
M: Measure, correct if necessary
Pos.
no.
Work to carry out
Interval in hours - may vary due to ap-
plication
5 20 80 500 1000 3000
Interval in days/weeks/months - may
vary due to application
1d 1w 1m 6m 12m 36m
To Next Page
Loading...
