Connect to your
Hub’s Wireless:
Select your Wireless Network:
BTHub6-AB CD
1
Enter your Wireless
Passwo rd/key :
8888wwwwwWWW
2
Admin Password for
Hub Manager:
8888WWWW
Power
On | Off
Power
Factory
Reset
USB Gig Ethernet
1 2 3 4
Broadband
Connect your devices
You’ll need your Hub’s wireless network name and password.
They’re on the back of your Hub.
Your Hub will be called something like BTHub6-ABCD. If your device
supports WPS, just press the WPS button on your Hub – it’s a quick
way to connect.
Finish setting up online with Smart Setup
Whenever you connect a device to your Hub for the rst time, your
web browser will ask you if you want to activate any of your BT Extras,
including BT Parental Controls.
Getting the best wi- signal at home
For tips on how to get the best wi- signal in your home, go to
bt.com/yourwi-fi
All done.
Can’t connect using wireless?
Using your Ethernet cable (yellow ends), connect your device to
any of the yellow Ethernet ports on the back of your Hub.
How to turn o Smart Setup
Just follow the steps at bt.com/help/smartswitcho
WPS
button
The password/
key is case
sensitive
2 3
4
Connect to your
Hub’s Wireless:
Select your Wireless Network:
BTHub6-ABCD
1
Enter your Wireless
Password/key:
To Next Page
Loading...
Need help?
General
