BT SSE160L - Warning and Information Plates and Symbols

Warning and information plates and symbols
© BT 237077-040
12
Warning and information
plates and symbols
The figure shows the position and significance of the plates and
symbols located on the truck.
1. Hydraulic controls: stabilizers
2. A: 180°) Horn,
accelerator, brake button
Hydraulic controls: Lifting/lowering forks
B: 360°) Horn,
accelerator/brake control, travel direction selector
Hydraulic controls: Lifting/lowering forks
3. A) Do not walk under an elevated load
B) Do not stand on the forks
4. Maximum height for rated capacity
5. Lifting points
6. Hydraulic oil filling
7. Serial number
8. Capacity plate
9. Modification plate
10. Identification plate