Daily service and function checks
© BT 237077-040
66
Daily service and function
checks
• The operator is responsible for the daily service and care of
the truck.
• Carry out the daily service at the start of the working day or
shift, before the truck is used. The daily service is a function
control as set out in the checklist below.
• You need no tools to carry out the service checks.
• If you fail to carry out the daily service, the safety and reliabil-
ity of the truck can be affected.
WARNING!
Never neglect the daily service and function checks.
Serious accidents can occur.
Always report any faults or damage to the management with-
out delay. Never use a truck that has faults.
Pos no Check points Action
1 Steering wheel Check its function
2 Hydraulic functions Check its function
3 Emergency switch off Check its function
4 Running time Carry out maintenance as set out in the table in
chapter Maintenance
5 Horn Check its function
6 180°: Travel brake
360°: Travel direction selector
Check its function
7 180°: Speed control/Travel
direction selector
360°: Speed control/ Travel
brake
Check its function
8 Chassis Check for damage, remove dirt and the like
9 Battery Check acid levelcharge condition
10 Lifting device Check for damage, remove dirt and the like
11 Wheels Check for damage, remove oil, metal chips and
the like
12 Hydraulic system Check the oil level and for oil leakage
13 Drive unit Inspect abnormal noises and leakage
14 Safety pedal/Parking brake Check its function
To Next Page
Loading...