Safety regulations
© BT 237077-040
7
General safety regulations
• Always carry out daily service before the truck is used, see
chapter Daily service and function checks. The working order
of all safety equipment, guards and safety switches should be
checked before you use the truck. Such safety equipment
must not be disengaged or removed.
• Check to make sure that all warning and machine designation
plates are clean and undamaged.
The battery must be secured in its intended compartment. The
battery shall have a weight that corresponds with the information
stated on the truck’s identification plate.
The truck must not be used if it is damaged or has faults that
affect safety or its safe use. The truck may not be used if it has
been repaired, modified or adjusted unless it has been checked
and approved by personnel authorised by BT.
Operating the truck
The truck is designed and produced to be your tool when collect-
ing and depositing goods at different heights.
If the truck is to be used in cold storage rooms the truck must be
especially built for this type of use.
It is not permitted to use the truck for purposes that it has not
been designed and produced for, e.g. the following applications:
- In areas where the atmosphere contains dust or gases
that can cause fires or explosions.
- As a towing truck for trailers.
- To tow other trucks.
- To transport/lift passengers.
To Next Page
Loading...