Main components
© BT 237077-040
20
Main components
1. Mast:
The mast is a clear-view model.
2. Recharging connector:
The battery is recharged via this permanently attached
recharging connector.
3. Battery:
24V with different Ah values.
4. Identification plate:
With model designation, serial number, year of manufacture,
weight without battery, battery weight, rated capacity, battery
voltage and manufacturer.
5. Control console:
The control console is adjustable to the appropriate height
and angle, to provide a comfortable operating position.
Steering, raise/lower, signal, travel direction, accelerator/
brake and any additional hydraulic functions are operated
from the control console. The control console also includes
the emergency switch off, the ignition key and the display.
The display provides information relating to the truck’s oper
-
ating time, error codes, travel direction, parking brake, steer-
ing angle and battery charge status, as well as indicating the
time of day.
6. Serial number:
The serial number plate fitted to the chassis.
7. Cover:
Easily swivelled to provide good access for servicing.
8. Foot pedal:
With safety switch and automatic parking brake.
9. Hydraulic valves:
The valves are located to provide easy access.
10. Hydraulic unit:
Pump motor, pump and oil tank.
11. Electrical steering motor:
Mounted with the drive gear to provide a compact design.
12. Drive unit with brake:
Drive motor, gears and drive wheel integrated in a compact
unit. Steering bearings between the motor and gears.
13. Electronics:
All the electronics are located together in a protected area of
the motor.
14. Control circuit fuse:
10A, BT part no. 122308-100.
15. Fuse for electrical steering wheel:
20 A, BT part no. 122308-200.
16. Drive motor fuse:
160 A, BT part no. 29223.
17. Pump motor fuse:
200 A, BT part no. 29673.
To Next Page
Loading...