Controls and instruments truck with 360° steering
© BT 237077-040
27
Parameter control (F)
When checking the set parameters the indicator window (F) will
light. See “Display and programming”.
Parking brake indicator (H)
The indicator window is lit when the parking brake is applied.
Stabiliser Indicator (I)
(Option)
The light flashes when the stabilisers have left their inner posi-
tion.
Drive wheel indicator (J)
(Option)
The position of the drive wheel and the truck’s direction of travel
are indicated by one of the arrows in the diagram. When the
opposite direction is selected without changing the position of
the drive wheel the opposite arrow will light.
Accelerator/brake control (6)
The speed is variably controlled by moving the accelerator/brake
lever forwards from the neutral position.
The brakes are applied by moving the accelerator/brake lever
backwards from the neutral position. The brakes are applied in
two stages, first gentle braking and then after a set delay full
braking.
Horn (7)
The horn sounds as long as the button is pressed.
Travel direction selector (8)
• Press button 4 to select the travel direction. If you are unsure
of the activated direction of travel see the travel direction indi
-
cator (A) on the display (3). Press once to travel in the direc-
tion of the forks. Press once more to change the travel
direction.
To Next Page
Loading...