BT SSE160L - Page 73

Maintenance
© BT 237077-040
73
1)
Change filter after 50 - 100 hrs, and then every 1000 hrs.
7.0 Battery
7.1 Check the electrolyte level
(10-15 mm above the cell plates)
X
7.2 Check the connections on the battery, truck
and charger
X
7.3 Check the cell and pole guard. X
7.4 Check the fluid density and temperature X
8.0 Hydraulic system
8.1 Check hoses and couplings for leakage X
8.2 Check pipes and hoses for wear X
8.3 Check the tank for leakage and its mountings X
8.5 Check the oil level X
8.6 Change oil and filter X
1
X
9.0 Cylinders
9.1 Check for leakage X
9.2 Check the mountings X
10.0 Mast
10.1 Check for damage and crack formation X
10.2 Tighten the mast mounting X
10.3 Check for play on the rollers X
10.4 Check the electrical limit function X
10.5 Check for wear on the lifting chains and
sprockets
X
10.6 Check hoses and couplings for leakage X
10.7 Check for wear to the forks and other lifting
devices
X
11.0 Control console
11.1 Check the mountings X
11.2 Check the microswitches and hydraulic func-
tions
X
11.3 Check the emergency stop. X
11.4 Check the gas cartridge’s capacity and locking
mechanism
X
12.0 Pedals
12.1 Check the functioning of the foot pedal X
Pos.
nr.
Work to carry out
Intervals in hours 5 20 160 250 500 1000
Intervals in Days/Weeks/Months 1 d 1 w 2 m 3 m 6 m 12 m