Maintenance
Maintenance schedule
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 5 – 5
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
Work area Pos. Action 750h/12m Estimat
ed time
1700 Drive
motor
a Check the drive motor's
attachment.
X 4:30
minutes.
b Clean the drive motor. X
c Inspect for abnormal noise in the
drive motor bearings.
X
2550 Drive
gear
d Inspect for abnormal noise X
e Check the mountings and play in
the steering bearings.
X
3180 Brakes
f Check for wear on the brake disc.
Minimum brake disc thickness: 7.9
mm
X
g Check the gap of the parking brake
when it is not applied.
Nominal brake gap: 0.3 mm
Minimum permitted gap: 0.2 mm
Maximum permitted gap: 0.5 mm.
Measuring must be done around
the entire pressure disc, both on
the inside and the outside.
X
h Clean the brake. X
a
d
e
f,g,h
b
c
https://www.besttruckmanuals.com/
To Next Page
Loading...
