BT YouView+ User Manual

Option B
If your Hub’s too far away from your YouView box to connect using
the Ethernet cable, you’ll need to use Powerline adapters.
1
Using one of your Ethernet cables, connect your YouView box’s
Ethernet socket to one of the Powerline adapters (it doesn’t matter
which one).
2
Plug that Powerline adapter into a power socket on the wall and
switch it on.
3
Using the other Ethernet cable, connect one of the yellow Ethernet
ports on the back of your Hub to the other Powerline adapter.
(Don’t use the red port on your Hub – it won’t work.)
4
Plug that Powerline adapter into a power socket on the wall and
switch it on.
Using extension leads
You can use extension leads with
Powerline adapters, but you need
to connect them like this:
SPDIF
ANTENNA IN
ANTENNA OUT
HDMI 5V 0.5A
ETHERNET
TV SCART
AUDIO
L R
VIDEO
OFF ON
Ethernet socket
Powerline
adapter 2
Powerline
adapter 1
Your BT Home Hub
Ethernet cable (supplied)
Ethernet cable
(supplied with your
Powerline adapters)
Can I use Powerline adapters?
To find out what products are
compatible with Powerline adapters,
go to bt.com/help/tvpowerlines
Getting set up
Getting set-up For help, go to bt.com/help/youview10 11

BT YouView+ Specifications

General

Recording	Yes
4K Ultra HD	No
Hard Drive Capacity	500GB
Resolution	1080p
Connectivity	Ethernet, HDMI, USB
Tuner	Freeview HD
On-demand Services	BBC iPlayer, Demand 5
Catch-up TV	Yes