Operating Manual 15
Installing the Software
16
When the installation of the first driver is complete, click the Finish button to
continue.
17
The Found New Hardware Wizard will again begin to install the next driver. Click
the Next button to continue.
18 Select “Search for a suitable driver for my device” and click the Next button.
19
If the BVM Installation CD is not inserted, insert it now. Make sure only the box
for CD-ROM drives is checked and click the Next button.
20
The Hardware Wizard will search for the driver. Click the Next button when its
complete to install the driver.
Steps to Install USB Drivers Screen Shot
To Next Page
Loading...
