14 S5 Battery Validation System
For WINDOWS 2000 Installation from CD Screen Shot
11
The drivers should be installed from the BVM Installation CD. Connect the USB
port on the SCM-600 to a free USB port on the PC or hub connected to a USB
port on the PC. This will bring up the Found New Hardware Wizard.
12 Click the Next button.
13 Select “Search for a suitable driver for my device” and click the Next button.
14
If the BVM Installation CD is not inserted, insert it now. Make sure only the box
for CD-ROM is checked and click the Next button.
15
The Hardware Wizard will search for the driver. Click the Next button when its
complete to install the driver.
Steps to Install USB Drivers Screen Shot
To Next Page
Loading...
