46 S5 Battery Validation System
CHECKING BATTERIES FOR PROBLEMS
Setting Up Automatic Notification of Battery Problems
The BVS Observer automatically notifies you of battery problems, and runs in the background. It can be
installed on only one computer, and requires a WIBU key for its use. It should have been installed on a
computer that is on all the time, or at least most of the time. Once you are alerted to a problem, you can then
use the BVM Manager to pinpoint and diagnose the problem.
Setting Up Automatic Notification of Battery
Problems ............................................................... 46
Looking for Battery Alarms ..................................... 49
Action How to do it Picture
1
Make sure the WIBU
key is plugged in.
Plug the WIBU key into any USB port on your
computer.
2
Start the BVS
Observer program.
From the Start menu, select BTECH, then select BVS Observer
To Next Page
Loading...
