Operating Manual 55
Viewing Battery Activity
Viewing Battery Measurements
Action How to do it Picture
1
If not already
running, start BVM,
open a *.bvm file.
a. From the Start menu, select Programs > BTECH > Battery Validation Manager 4.0
b. In the Location List window, click on a location file, then click OK. A *.bvm file will open,
showing battery measurements.
2
View the battery
measurements in
numeric and graph
form.
When looking at
graphs, switch
beween different
snapshots in time to
see performance
trends.
a. In the Measurements tab of the open *.bvm file display, double-click on a numerical
measurement. A graph display will appear, showing a snapshot in time of all the battery readings.
b. Press the PgUp and PgDn keys to the previous or next graphed battery reading.
To Next Page
Loading...
