Installation Manual 33
Installation Procedure
Procedure
1. Attach the VSL Pigtails to the Battery Jars
2. Run the VSL Wires to the VM-24s
a. Protect yourself from electrical shock
b. Attach the appropriate VSL pigtails to the 1/4” male quick
disconnect tabs. See Cable Work Sheet.
a. Protect yourself
b. Match the VSL Wires to
the appropriate VSL pigtail
according to the Wire List
in the Appendix.
c. Attach the VSL wires
together at the fuse
holders; DO NOT insert a
fuse at this time.
d. Run the VSL wire along
the current path
31. Picture of plugging a VSL pigtail to a quick
disconnect tab
To Next Page
Loading...